Trouble with MWO lange coupler

Hello

I have some problem with MWO. When I connect microstrip lines to pins of lange coupler on View layout they are connected incorrect.
[img]

you first connect them in schematic, and after generating the the layout it could be connect correctly!

What mean generate? I connect in schematic and after press the icon on toolbar View Layout.

Select all the elements in the layout and choose Edit:Snap_All_Together.

You really need to go through the getting started guide. It will walk you through several layout examples.

You should use the "snap together" feature in the MWO layout.

Usually, you select the elements that you want to keep in place, and then Control-select the element that you want to position correctly, and then select the "Snap together" button on the toolbar. If the Lange connection and the MLIN elements are different widths, then you should put an MTEES between them; that is a smart step element that automatically senses the widths of the lines of both sides and puts in the correct step model.

--Max

Thanks for answers but in MWO 2002 is real mistake. I install 2006 version - connection is aright.

why you dont use the ADS? its so powerfull and have a lot of features! that i dont think i must try any other software!