sub-drawing 之大問題 急﹗﹗﹗

*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "C191"
Unable to paste the symbol - ("CC0603" "PACKAGE" "C191")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "H1"
Scaled value has been rounded off.
Refdes not assigned at location X 9436.63 Y 2598.0
Unable to paste the symbol - ("H-SPE2D138P2" "PACKAGE" "H1")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "R135"
Refdes not assigned at location X 9355.87 Y 3387.27
Unable to paste the symbol - ("RC0805" "PACKAGE" "R135")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "R137"
Scaled value has been rounded off.
Refdes not assigned at location X 9326.63 Y 2563.0
Unable to paste the symbol - ("RC0603" "PACKAGE" "R137")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "C190"
Scaled value has been rounded off.
Refdes not assigned at location X 9121.63 Y 2538.0
Unable to paste the symbol - ("CC0603" "PACKAGE" "C190")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "R139"
Refdes not assigned at location X 9211.63 Y 2543.0
Unable to paste the symbol - ("RC0603" "PACKAGE" "R139")
*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "L11"
Refdes not assigned at location X 9066.63 Y 2323.0

高手們﹐這些都是為讓兩板子合并成一個板子﹐要導出SUB-DRAWING ,導入SUB-DRAWING 出的錯﹗﹗

什么 原因啊﹐﹐﹐ 如何解決啊﹗﹖﹖

急  急 

*WARNING* (axlDBCreateSymbolSkeleton): Refdes not found - "R135"

找不到这个器件。

1、网表不一致造成的

2、输出时要 选一个选项的,在控制面板最左边的那个打个勾（很久不用，忘记了）

两个原因之中的一个都会造成这个问题

首先﹐謝謝帥哥的回答﹗﹗﹗

你說的第一點﹐我有另建一新BOARD來貼CLP！,來看﹐還是這個問題﹗﹗﹗

第二點﹐  在導出和導入時我都有選"保留標號"等選項﹗

繼續等待中  謝謝﹗﹗﹗（期待您的回復﹐謝謝）

我也不会，帮顶一下

很遗憾的告诉小编，这是不可行的。

带器件导出到另一块板上的前提是另一块板上要有这些器件，如：C191。你想通过sub-drawing将两块板合并的话，就要有这两块板的网表在同一个PCB中，这样又会有新的问题:两块板的封装名不能重复，封装要一致，而且最好网络名也不一样。

不知道这样说小编明白没有?

其实拼两块板可以在光绘中去拼，直接拼PCB要求会比较多。

顶！