- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
出gerber出错，请各位帮忙看一下
录入：edatop.com 点击：
(------------------------------------------------------------)
( )
( ARTWORK LOG )
( )
( Drawing : MSI-1358_V1_1-key.brd )
( Software Version : unreleased )
( Date/Time : Thu May 16 21:19:25 2013 )
( )
(------------------------------------------------------------)
******************************************
WARNING: DRC OUT OF DATE on this layout.
******************************************
---- Photoplot outline rectangle not found ... using drawing extents
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 24000 16000
FORMAT 5.3
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL YES
UNDEF-APT-CONT NO
WARNING: for raster artwork formats, artwork accuracy must be
at least one place greater than the database accuracy, up
to the maximum accuracy allowed by the selected output format.
Increase the accuracy by increasing the "Decimal Places" in
the FORMAT section of the artwork parameters and then rerun
artwork.
The current output is rounding down the data. Failure to change
the format may result in inaccurate arc coordinates in the output
files and possible shape/void plotting failures.
================================================================
PROCESSING FILM < drill >
TO FILE < D:/Documents/Desktop/99/drill.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: 0 width line found at (17257.00 7693.00)
... using undefined line width of 5.00
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 5.00
WARNING: text composed 0 width line found at (17706.50 10596.50)
... using undefined line width of 5.00
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 5.00
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
drill created with warnings
================================================================
PROCESSING FILM < solder_bot >
TO FILE < D:/Documents/Desktop/99/solder_bot.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04330 DARK
CIRCLE 0.04600 DARK
CIRCLE 0.04900 DARK
CIRCLE 0.05300 DARK
CIRCLE 0.06000 DARK
CIRCLE 0.06100 DARK
SQUARE 0.04200 0.000 NO DARK
SQUARE 0.04600 0.000 NO DARK
RECTANGLE 0.02600 x 0.03000 0.000 NO DARK
RECTANGLE 0.02600 x 0.03000 90.000 NO DARK
RECTANGLE 0.03800 x 0.02600 0.000 NO DARK
RECTANGLE 0.04000 x 0.03600 0.000 NO DARK
RECTANGLE 0.04000 x 0.03600 90.000 NO DARK
RECTANGLE 0.04200 x 0.05600 0.000 NO DARK
RECTANGLE 0.19685 x 0.19685 90.000 NO DARK
OBLONG 0.01378 x 0.04331 0.000 NO DARK
OBLONG 0.01378 x 0.04331 90.000 NO DARK
OBLONG 0.01600 x 0.03600 0.000 NO DARK
OBLONG 0.01600 x 0.03600 90.000 NO DARK
OBLONG 0.06000 x 0.15900 0.000 NO DARK
OBLONG 0.07100 x 0.14400 0.000 NO DARK
OBLONG 0.07100 x 0.16700 0.000 NO DARK
OBLONG 0.07500 x 0.15600 0.000 NO DARK
PAD SHAPE SHAPE26X34 90.000 YES DARK
PAD SHAPE SHAPE26X34 270.000 YES DARK
solder_bot created with warnings
================================================================
PROCESSING FILM < solder_top >
TO FILE < D:/Documents/Desktop/99/solder_top.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04600 DARK
CIRCLE 0.04724 DARK
CIRCLE 0.04900 DARK
CIRCLE 0.05300 DARK
CIRCLE 0.06100 DARK
SQUARE 0.04600 0.000 NO DARK
RECTANGLE 0.01600 x 0.05300 0.000 NO DARK
RECTANGLE 0.01700 x 0.10800 0.000 NO DARK
RECTANGLE 0.03600 x 0.10400 0.000 NO DARK
RECTANGLE 0.03800 x 0.10400 0.000 NO DARK
RECTANGLE 0.04900 x 0.10400 0.000 NO DARK
RECTANGLE 0.05500 x 0.10400 0.000 NO DARK
RECTANGLE 0.06300 x 0.08900 0.000 NO DARK
RECTANGLE 0.06500 x 0.08500 0.000 NO DARK
RECTANGLE 0.07100 x 0.08100 0.000 NO DARK
RECTANGLE 0.09300 x 0.14400 0.000 NO DARK
OBLONG 0.03100 x 0.08100 0.000 NO DARK
OBLONG 0.04100 x 0.08100 0.000 NO DARK
OBLONG 0.06000 x 0.15900 0.000 NO DARK
OBLONG 0.07100 x 0.14400 0.000 NO DARK
OBLONG 0.07100 x 0.16700 0.000 NO DARK
OBLONG 0.07500 x 0.15600 0.000 NO DARK
OBLONG 0.08394 x 0.03346 0.000 NO DARK
PAD SHAPE SHAPE26X34 0.000 NO DARK
PAD SHAPE SHAPE26X34 180.000 NO DARK
solder_top created with warnings
================================================================
PROCESSING FILM < paste_bot >
TO FILE < D:/Documents/Desktop/99/paste_bot.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03940 DARK
CIRCLE 0.06000 DARK
SQUARE 0.03600 0.000 NO DARK
RECTANGLE 0.02000 x 0.02400 0.000 NO DARK
RECTANGLE 0.02000 x 0.02400 90.000 NO DARK
RECTANGLE 0.03200 x 0.02000 0.000 NO DARK
RECTANGLE 0.03400 x 0.03000 0.000 NO DARK
RECTANGLE 0.03400 x 0.03000 90.000 NO DARK
RECTANGLE 0.03600 x 0.05000 0.000 NO DARK
OBLONG 0.00984 x 0.03937 0.000 NO DARK
OBLONG 0.00984 x 0.03937 90.000 NO DARK
OBLONG 0.01200 x 0.03200 0.000 NO DARK
OBLONG 0.01200 x 0.03200 90.000 NO DARK
OBLONG 0.19291 x 0.19291 90.000 NO DARK
PAD SHAPE SHAPE20X28 90.000 YES DARK
PAD SHAPE SHAPE20X28 270.000 YES DARK
paste_bot created with warnings
================================================================
PROCESSING FILM < paste_top >
TO FILE < D:/Documents/Desktop/99/paste_top.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04724 DARK
CIRCLE 0.05500 DARK
SQUARE 0.04000 0.000 NO DARK
RECTANGLE 0.01000 x 0.04700 0.000 NO DARK
RECTANGLE 0.01100 x 0.10200 0.000 NO DARK
RECTANGLE 0.03000 x 0.09800 0.000 NO DARK
RECTANGLE 0.03200 x 0.09800 0.000 NO DARK
RECTANGLE 0.04300 x 0.09800 0.000 NO DARK
RECTANGLE 0.04900 x 0.09800 0.000 NO DARK
RECTANGLE 0.05700 x 0.08300 0.000 NO DARK
RECTANGLE 0.05900 x 0.07900 0.000 NO DARK
RECTANGLE 0.06500 x 0.07500 0.000 NO DARK
RECTANGLE 0.08700 x 0.13800 0.000 NO DARK
OBLONG 0.02500 x 0.07500 0.000 NO DARK
OBLONG 0.03500 x 0.07500 0.000 NO DARK
OBLONG 0.05400 x 0.15300 0.000 NO DARK
OBLONG 0.06500 x 0.13800 0.000 NO DARK
OBLONG 0.06500 x 0.16100 0.000 NO DARK
OBLONG 0.06900 x 0.15000 0.000 NO DARK
OBLONG 0.08000 x 0.02953 0.000 NO DARK
PAD SHAPE SHAPE20X28 0.000 NO DARK
PAD SHAPE SHAPE20X28 180.000 NO DARK
paste_top created with warnings
================================================================
PROCESSING FILM < SILK_BOT >
TO FILE < D:/Documents/Desktop/99/SILK_BOT.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00390 DARK
CIRCLE 0.00500 DARK
SILK_BOT created with warnings
================================================================
PROCESSING FILM < SILK_TOP >
TO FILE < D:/Documents/Desktop/99/SILK_TOP.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(9516.44 9028.15) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9526.69 9029.69) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10127.72 9269.39) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10141.97 9283.34) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10127.72 9298.79) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10142.84 9284.05) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10128.02 9269.09) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(14925.41 7863.94) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13755.58 7716.52) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.00600 DARK
CIRCLE 0.00700 DARK
CIRCLE 0.00800 DARK
SILK_TOP created with warnings
================================================================
PROCESSING FILM < BOTTOM >
TO FILE < D:/Documents/Desktop/99/BOTTOM.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
ERROR: aborting film - Shape with first seg=(11210.08 7727.26) [layer=BOTTOM]
has a void with extents [(12294.72 7788.51) (12369.76 7959.55)] that touches
another shape with first seg=(11210.08 7727.26). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in BOTTOM--halting output. Artwork file not generated.
*** ERROR with BOTTOM
================================================================
PROCESSING FILM < GND2 >
TO FILE < D:/Documents/Desktop/99/GND2.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
GND2 created with warnings
================================================================
PROCESSING FILM < SIG >
TO FILE < D:/Documents/Desktop/99/SIG.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(10849.82 8267.53) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10849.69 8268.11) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10831.89 8250.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10831.89 8190.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10874.89 8009.20) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10874.89 8009.19) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(15022.82 7964.66) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10618.75 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10562.38 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10562.37 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10159.98 8986.71) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9968.32 9057.48) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9488.92 8836.26) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9508.59 8856.40) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9548.59 8866.40) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10555.87 9195.08) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10498.74 9183.92) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10456.40 9206.41) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10497.28 7856.12) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10563.19 7694.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10563.20 7694.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10617.91 7693.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10595.12 7749.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10586.01 7748.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10586.00 7749.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10484.27 7850.72) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10599.68 7738.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10581.45 7737.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10581.44 7738.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10613.36 7705.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10567.77 7704.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10567.76 7705.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10576.87 7727.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10576.88 7727.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10604.23 7726.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10572.31 7716.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10572.32 7716.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10608.79 7715.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00450 DARK
CIRCLE 0.00500 DARK
CIRCLE 0.00600 DARK
CIRCLE 0.00800 DARK
CIRCLE 0.01500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
SIG created with warnings
================================================================
PROCESSING FILM < POWER >
TO FILE < D:/Documents/Desktop/99/POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(15022.82 7964.66) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10229.61 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10229.64 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10230.36 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10255.00 9110.73) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10255.00 9109.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.01000 DARK
CIRCLE 0.01500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
POWER created with warnings
================================================================
PROCESSING FILM < GND1 >
TO FILE < D:/Documents/Desktop/99/GND1.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500
( )
( ARTWORK LOG )
( )
( Drawing : MSI-1358_V1_1-key.brd )
( Software Version : unreleased )
( Date/Time : Thu May 16 21:19:25 2013 )
( )
(------------------------------------------------------------)
******************************************
WARNING: DRC OUT OF DATE on this layout.
******************************************
---- Photoplot outline rectangle not found ... using drawing extents
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 24000 16000
FORMAT 5.3
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL YES
UNDEF-APT-CONT NO
WARNING: for raster artwork formats, artwork accuracy must be
at least one place greater than the database accuracy, up
to the maximum accuracy allowed by the selected output format.
Increase the accuracy by increasing the "Decimal Places" in
the FORMAT section of the artwork parameters and then rerun
artwork.
The current output is rounding down the data. Failure to change
the format may result in inaccurate arc coordinates in the output
files and possible shape/void plotting failures.
================================================================
PROCESSING FILM < drill >
TO FILE < D:/Documents/Desktop/99/drill.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: 0 width line found at (17257.00 7693.00)
... using undefined line width of 5.00
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 5.00
WARNING: text composed 0 width line found at (17706.50 10596.50)
... using undefined line width of 5.00
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 5.00
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
drill created with warnings
================================================================
PROCESSING FILM < solder_bot >
TO FILE < D:/Documents/Desktop/99/solder_bot.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04330 DARK
CIRCLE 0.04600 DARK
CIRCLE 0.04900 DARK
CIRCLE 0.05300 DARK
CIRCLE 0.06000 DARK
CIRCLE 0.06100 DARK
SQUARE 0.04200 0.000 NO DARK
SQUARE 0.04600 0.000 NO DARK
RECTANGLE 0.02600 x 0.03000 0.000 NO DARK
RECTANGLE 0.02600 x 0.03000 90.000 NO DARK
RECTANGLE 0.03800 x 0.02600 0.000 NO DARK
RECTANGLE 0.04000 x 0.03600 0.000 NO DARK
RECTANGLE 0.04000 x 0.03600 90.000 NO DARK
RECTANGLE 0.04200 x 0.05600 0.000 NO DARK
RECTANGLE 0.19685 x 0.19685 90.000 NO DARK
OBLONG 0.01378 x 0.04331 0.000 NO DARK
OBLONG 0.01378 x 0.04331 90.000 NO DARK
OBLONG 0.01600 x 0.03600 0.000 NO DARK
OBLONG 0.01600 x 0.03600 90.000 NO DARK
OBLONG 0.06000 x 0.15900 0.000 NO DARK
OBLONG 0.07100 x 0.14400 0.000 NO DARK
OBLONG 0.07100 x 0.16700 0.000 NO DARK
OBLONG 0.07500 x 0.15600 0.000 NO DARK
PAD SHAPE SHAPE26X34 90.000 YES DARK
PAD SHAPE SHAPE26X34 270.000 YES DARK
solder_bot created with warnings
================================================================
PROCESSING FILM < solder_top >
TO FILE < D:/Documents/Desktop/99/solder_top.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04600 DARK
CIRCLE 0.04724 DARK
CIRCLE 0.04900 DARK
CIRCLE 0.05300 DARK
CIRCLE 0.06100 DARK
SQUARE 0.04600 0.000 NO DARK
RECTANGLE 0.01600 x 0.05300 0.000 NO DARK
RECTANGLE 0.01700 x 0.10800 0.000 NO DARK
RECTANGLE 0.03600 x 0.10400 0.000 NO DARK
RECTANGLE 0.03800 x 0.10400 0.000 NO DARK
RECTANGLE 0.04900 x 0.10400 0.000 NO DARK
RECTANGLE 0.05500 x 0.10400 0.000 NO DARK
RECTANGLE 0.06300 x 0.08900 0.000 NO DARK
RECTANGLE 0.06500 x 0.08500 0.000 NO DARK
RECTANGLE 0.07100 x 0.08100 0.000 NO DARK
RECTANGLE 0.09300 x 0.14400 0.000 NO DARK
OBLONG 0.03100 x 0.08100 0.000 NO DARK
OBLONG 0.04100 x 0.08100 0.000 NO DARK
OBLONG 0.06000 x 0.15900 0.000 NO DARK
OBLONG 0.07100 x 0.14400 0.000 NO DARK
OBLONG 0.07100 x 0.16700 0.000 NO DARK
OBLONG 0.07500 x 0.15600 0.000 NO DARK
OBLONG 0.08394 x 0.03346 0.000 NO DARK
PAD SHAPE SHAPE26X34 0.000 NO DARK
PAD SHAPE SHAPE26X34 180.000 NO DARK
solder_top created with warnings
================================================================
PROCESSING FILM < paste_bot >
TO FILE < D:/Documents/Desktop/99/paste_bot.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.03940 DARK
CIRCLE 0.06000 DARK
SQUARE 0.03600 0.000 NO DARK
RECTANGLE 0.02000 x 0.02400 0.000 NO DARK
RECTANGLE 0.02000 x 0.02400 90.000 NO DARK
RECTANGLE 0.03200 x 0.02000 0.000 NO DARK
RECTANGLE 0.03400 x 0.03000 0.000 NO DARK
RECTANGLE 0.03400 x 0.03000 90.000 NO DARK
RECTANGLE 0.03600 x 0.05000 0.000 NO DARK
OBLONG 0.00984 x 0.03937 0.000 NO DARK
OBLONG 0.00984 x 0.03937 90.000 NO DARK
OBLONG 0.01200 x 0.03200 0.000 NO DARK
OBLONG 0.01200 x 0.03200 90.000 NO DARK
OBLONG 0.19291 x 0.19291 90.000 NO DARK
PAD SHAPE SHAPE20X28 90.000 YES DARK
PAD SHAPE SHAPE20X28 270.000 YES DARK
paste_bot created with warnings
================================================================
PROCESSING FILM < paste_top >
TO FILE < D:/Documents/Desktop/99/paste_top.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04724 DARK
CIRCLE 0.05500 DARK
SQUARE 0.04000 0.000 NO DARK
RECTANGLE 0.01000 x 0.04700 0.000 NO DARK
RECTANGLE 0.01100 x 0.10200 0.000 NO DARK
RECTANGLE 0.03000 x 0.09800 0.000 NO DARK
RECTANGLE 0.03200 x 0.09800 0.000 NO DARK
RECTANGLE 0.04300 x 0.09800 0.000 NO DARK
RECTANGLE 0.04900 x 0.09800 0.000 NO DARK
RECTANGLE 0.05700 x 0.08300 0.000 NO DARK
RECTANGLE 0.05900 x 0.07900 0.000 NO DARK
RECTANGLE 0.06500 x 0.07500 0.000 NO DARK
RECTANGLE 0.08700 x 0.13800 0.000 NO DARK
OBLONG 0.02500 x 0.07500 0.000 NO DARK
OBLONG 0.03500 x 0.07500 0.000 NO DARK
OBLONG 0.05400 x 0.15300 0.000 NO DARK
OBLONG 0.06500 x 0.13800 0.000 NO DARK
OBLONG 0.06500 x 0.16100 0.000 NO DARK
OBLONG 0.06900 x 0.15000 0.000 NO DARK
OBLONG 0.08000 x 0.02953 0.000 NO DARK
PAD SHAPE SHAPE20X28 0.000 NO DARK
PAD SHAPE SHAPE20X28 180.000 NO DARK
paste_top created with warnings
================================================================
PROCESSING FILM < SILK_BOT >
TO FILE < D:/Documents/Desktop/99/SILK_BOT.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00390 DARK
CIRCLE 0.00500 DARK
SILK_BOT created with warnings
================================================================
PROCESSING FILM < SILK_TOP >
TO FILE < D:/Documents/Desktop/99/SILK_TOP.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(9516.44 9028.15) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9526.69 9029.69) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10127.72 9269.39) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10141.97 9283.34) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10127.72 9298.79) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10142.84 9284.05) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10128.02 9269.09) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(14925.41 7863.94) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13755.58 7716.52) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.00600 DARK
CIRCLE 0.00700 DARK
CIRCLE 0.00800 DARK
SILK_TOP created with warnings
================================================================
PROCESSING FILM < BOTTOM >
TO FILE < D:/Documents/Desktop/99/BOTTOM.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
ERROR: aborting film - Shape with first seg=(11210.08 7727.26) [layer=BOTTOM]
has a void with extents [(12294.72 7788.51) (12369.76 7959.55)] that touches
another shape with first seg=(11210.08 7727.26). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in BOTTOM--halting output. Artwork file not generated.
*** ERROR with BOTTOM
================================================================
PROCESSING FILM < GND2 >
TO FILE < D:/Documents/Desktop/99/GND2.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
GND2 created with warnings
================================================================
PROCESSING FILM < SIG >
TO FILE < D:/Documents/Desktop/99/SIG.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(10849.82 8267.53) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10849.69 8268.11) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10831.89 8250.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10831.89 8190.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10874.89 8009.20) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10874.89 8009.19) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(15022.82 7964.66) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10618.75 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10562.38 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10562.37 7691.98) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10159.98 8986.71) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9968.32 9057.48) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9488.92 8836.26) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9508.59 8856.40) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(9548.59 8866.40) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10555.87 9195.08) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10498.74 9183.92) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10456.40 9206.41) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10497.28 7856.12) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10563.19 7694.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10563.20 7694.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10617.91 7693.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10595.12 7749.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10586.01 7748.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10586.00 7749.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10484.27 7850.72) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10599.68 7738.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10581.45 7737.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10581.44 7738.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10613.36 7705.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10567.77 7704.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10567.76 7705.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10576.87 7727.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10576.88 7727.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10604.23 7726.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10572.31 7716.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10572.32 7716.00) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10608.79 7715.99) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00450 DARK
CIRCLE 0.00500 DARK
CIRCLE 0.00600 DARK
CIRCLE 0.00800 DARK
CIRCLE 0.01500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.03000 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
SIG created with warnings
================================================================
PROCESSING FILM < POWER >
TO FILE < D:/Documents/Desktop/99/POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(15022.82 7964.66) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10229.61 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10229.64 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10230.36 9150.02) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10255.00 9110.73) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(10255.00 9109.31) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.01000 DARK
CIRCLE 0.01500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500 DARK
CIRCLE 0.06000 DARK
OBLONG 0.05400 x 0.12800 0.000 NO DARK
OBLONG 0.06500 x 0.11300 0.000 NO DARK
OBLONG 0.06500 x 0.13600 0.000 NO DARK
OBLONG 0.06900 x 0.12500 0.000 NO DARK
POWER created with warnings
================================================================
PROCESSING FILM < GND1 >
TO FILE < D:/Documents/Desktop/99/GND1.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Segment with same start and end points at
(12333.42 8070.95) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(13689.30 8070.96) will be ignored. Increasing output
accuracy may allow segment to be generated.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00500 DARK
CIRCLE 0.02000 DARK
CIRCLE 0.02400 DARK
CIRCLE 0.04000 DARK
CIRCLE 0.04300 DARK
CIRCLE 0.04700 DARK
CIRCLE 0.05500
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：老师们看一下，自己画的封装不显示管脚号是怎么回事？
下一篇：奇怪的差分走线
