• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 测试测量 > 示波器文献下载 > 数字示波器的“静默”和捕获技术

数字示波器的“静默”和捕获技术

录入:edatop.com     点击:

数字示波器的“静默”和捕获技术

内容简介:由于器件和功能的增多导致电路的测试和调试越来越困难,要全真地捕获非周期的噪声、串扰和瞬时等信号几乎不可能。通过分析数字示波器的原理,探知示波器的静默和捕获过程,分析总结了三家著名示波器生产厂家对波形捕获所应用的各项新技术。通过随机概论理论对波形捕获率的分析,得到了捕获率的量化计算公式和影响因素。提出了触发输出法和双脉冲计数法二种测试示波器波形捕获率的方法,并对市场中常见示波器的捕获率进行了实测验证。

Abstract:It is more difficult to test and debug circuits due to the increase of devices and their function. It is almost impos?sible to capture the non periodic noise,crosstalk and instantaneous signals entirely. According to the principle analysis of digital oscilloscope,the oscilloscope silence and capture process were ascertained. The various new technologies mastered by three well?known manufacturers to capture oscilloscope waveform are analyzed and summarized. Through the analysis of stochastic theory of waveform capture rate,the factors affecting capture rate formula and the quantification calculation formula were obtained. The trigger output method and double pulse counting method to test oscilloscope waveform capture rate are put forward. The methods were verified by testing the capture rate of the common oscilloscopes available in market.

作者:姚晓平,

关键词:波形捕获, 静默, 触发输出, 双脉冲法

上一篇:基于TLC7226的示波器x-y方式扫描的制作
下一篇:基于Agilent86100取样示波器的高速脉冲源

微波射频测量操作培训课程详情>>

  网站地图