• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 天线设计 > RFID/NFC天线设计交流 > Questions about the design of a 13.56 MHz magnetic loop antenna

Questions about the design of a 13.56 MHz magnetic loop antenna

录入:edatop.com     点击:
Hi everybody.
I have a few questions about the design of a 13.56 MHz magnetic loop antenna (to listen, not emit).
wavelenght is 300/13.56 = 22.12 m
With this value, how should I define antenna diameter ? Should I use ? wavelenght, ? wavelenght or something else ?
And what about number of turns ? Is it possible to reduce antenna diameter using more turns ?
Finaly, how should I design the tuning capacitor ?
Thanx a lot.

The best performance is from a full wavelength, but half wave will work. The meterial you use will have an effect on the size, 300/13.56 is wavelength in free space. I recomend a search on google for some better information..... As for designing the tuning capacitor, you dont, the veriable capacitor is a component you buy........ Hope this helps

Try to use a ferrite rod antenna similar to the one that used in tradiation AM radio except for different operating frequency. The size is much smaller. I have built a transmitter that operating at 27Mhz in the past using similar method, the rod length was around 60mm.

申明:网友回复良莠不齐,仅供参考。如需专业学习,请查看13.56MHz NFC/RFID天线设计培训课程

上一篇:RFID为什么用这种天线?
下一篇:The dimensions of a passive 13.56 RFID tag

13.56MHz 线圈天线设计详情>>
手机天线设计培训教程详情>>

手机天线设计培训教程 国内最全面、系统、专业的手机天线设计培训课程,没有之一;是您学习手机天线设计的最佳选择...【More..

微信公众号

    扫描二维码关注我们的微信公众号
    关注后首次购买本站课程可享受九折优惠

  网站地图