如何提取CDL时让电阻例化？

如何提取CDL时让电阻例化?一般为了layout的方便，电路中会标出电阻的W/L，所以提取的电阻CDL会这样：RGPS_1 net1 net2 $[RGPNC] $W=1u $L=10u
但这样hspice时仿真需要修改 加上电阻值或把电阻例化，形如这样：XRGPS_1 net1 net2 RGPNC W=1u L=10u
求助，如何提CDL时就能把电阻的CDL提出如第二种?

叫网管把，PDk工具没装好

是在cadence 里产生CDL吗? 如果这样的话,建议产生Hspice format 就可以了

Synopsys's Hercules provides an utility command : nettran
It could translate CDL to SPICE for simulation. Check it. FYI.
Or
Write a parser to translate CDL to SPICE.

或者你打开enviroment,然后把仿真器选成hspiceD,然后netlist->create,在save as中填入路径和文件名，这样的网表hspice也是可以仿真的（记的把上面一堆东西给注销了）

模型里没有HSPICED,这样这个不行

是的，用Export-->CDL方法提的，netlisting mode 为digital，请问怎样选产生Hspice format   ?

    照我的说的做一遍，有疑问再说。

    你做过吗?

    ...没坐过，咋知道

Step 1: check (and try) if you get to generate correct netlsit from hspiceD views. -> You already mentioned your library did not have hspiceD views.
Alternative: use a (sed/awk/perl) script to post-process the CDL netlist.
    RGPS_1 net1 net2 $[RGPNC] $W=1u $L=10u
In your specific case, since you only need to post-process the resistor netlist format, it can be done by a fairly simple "sed" script.
Contents of the sed script (for instance, let me call it raw.sed) is as follows:
   s/\$\[//
   s/\]//
   s/\$//g
Excecute the following command under Linux:
   sed -f raw.sed YourNetlistFileName > raw.out
, where YourNetlistFileName is the name of original netlist file.
Check and see if the processed netlist in raw.out has the format you need.
Good luck！

Thank you for your sharing.But i dont want to modify my netlist manully everytime.
do you have any other method?
Thanks

This is not manual editing.
This automation is executed by (Unix/Linux) shell script.

申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习本站推出的微波射频专业培训课程。