CST2013: Preloaded Result Templates

The installation of CST STUDIO SUITE contains a selection of preloaded Result Templates, which are useful to calculate all kind of post processing data and setup goal functions for the optimizer.
 

Note: All 1D Templates starting with a "-" sign, produce intermediate results (e.g. 3D or other data, not directly stored in tables).

To learn more about using template based processing, the Template Based Post Processing Overview guides you along a simple example.

Farfield and Antenna Properties

Farfield&Antenna / Farfield Result

Extracts all kind of farfield data to be used as farfield watch or goal.

Farfield&Antenna / Diversity Gain and Correlation (from Farfield)

This template calculates diversity gain from farfield, but only for single frquency. A broadband capability is available in the "Farfield Result" template.

Farfield&Antenna / Diversity Gain and Correlation (from S-Parameters)

This template calculates diversity gain from S-parameters.

General 1D

In this category several templates are available to load, modify, convert data.

General / Load 1D Data File (project and external)
This template can be used to load project internal 1D files such as time signals or probe results as well as external (measurement or other project) curves into the result templates.

General / 1D Result from 1D Result (Rescale xy, FFT, Derivation,
This template creates a new 1D result based on an existing one. (e.g. useful to rescale x or y or also apply analytical functions for x and or y).

General / 0D Value from 1D Result
The template is useful to extract a 0D number from an existing 1D result, such as e.g. integral, mean, min or max value.

General / Mix Template Results
This template creates a new 1D result by combing several existing 1D results using an analytic equation.

General / Wrap - Unwrap Phase

    This template can be used to wrap/unwrap a phase, which has been previously loaded or calculated as a 1D template.

Time Signals

TDR (Time Domain Reflectometry)
This template applies Time Domain Reflection and calculates the Impedance profile along a line.

2D and 3D Field Results

2D and 3D Field Results / Evaluate Field on Curve
This template extracts field data along predefined curves or calculates the integral along the curve.

2D and 3D Field Results / Evaluate Field on Face
This template calculates the integral along a predefined face.

2D and 3D Field Results / Evaluate Field in arbitrary Coordinates
This template extracts and plots field data along arbitrary coordinates (xyz, uvw, rfz, rtf). In addition this template can be used for reading out a field value in a certain point (0D), for integration along a line (1D), across a face (2D) or a volume (3D). Furthermore, it can be applied to ASCII export field values within user specified solids.

2D and 3D Field Results / - Mix 3D fields
This template offers a calculator for 3D Fields (add, subtract, cross product, ...)

2D and 3D Field Results / - Power Flow 3D Mode
For slow wave structures, simulated in the Eigenmode-solver using periodic boundaries, the power flow can be calculated.

2D and 3D Field Results / SAR Result
Automatic evaluation of SAR within parameter sweeps and optimization runs.

Special 0D Results

0D / 3D Eigenmode Result
This template can read many result values from an eigenmode simulation, such as resonance frequency, various Q-values, R/Q, line integral considering  transit time factor.

0D / 3D Eigenmode Coupling Coefficient
This template calculates the coupling coefficient between mode 1 and 2 based on their calculated resonance frequencies.

0D / Port Impedance
The template allows the comparison between different impedance calculation methods for waveguide ports, such as UI, PI and PU-method.