- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST2013: Polygon Simplification
录入：edatop.com 点击：
Modeling: Exchange
Import/Export Import 2D/EDA Files DXF More
Modeling: ExchangeImport/Export Import 2D/EDA Files GDSII More
The polygon simplification enables to smooth out segmented circles and arcs or to remove tiny edges from the DXF or GDSII model.
The two pictures below are showing a small part from an import. The left one without simplification and the right one with default simplification settings:
|
|
Circle/arc conversion frame
Arc resolution (degrees)
| The maximum angle in degrees between two adjacent segments. All smaller angles will be considered to be converted to arcs. The angle is only used for arcs and not for circles. |
Radius tolerance (percent)
| The maximum deviation in percent the distance a segment end point can have to the current definition of the circle center point. The tolerance is used for circles and arcs. |
Small edge removal frame
Minimum edge length
| Edges smaller than the defined length will be removed. Can be used to remove tiny fragments. |
CST培训课程推荐详情>>
最全面、最专业的CST微波工作室视频培训课程，可以帮助您从零开始，全面系统学习CST的设计应用【More..】
频道总排行
- CST2013: Mesh Problem Handling
- CST2013: Field Source Overview
- CST2013: Discrete Port Overview
- CST2013: Sources and Boundary C
- CST2013: Multipin Port Overview
- CST2013: Farfield Overview
- CST2013: Waveguide Port
- CST2013: Frequency Domain Solver
- CST2013: Import ODB++ Files
- CST2013: Settings for Floquet B