CST2013: Network Parameter Extraction Specials

Post Processing: Signal Post Processing Network Parameters Transmission Line Specials

Limit coupling frame

Limit coupling: If activated, the elements between wires coupled with less than the minimal coupling value given in the Minimal coupling edit field are omitted.

Minimal coupling: Enter here the minimal coupling value between wires.

Keep topology frame

Do not omit zero network elements: If activated, elements with a value lower than the respective value given in the Minimum R / G / L / C / K edit fields are set to this value and remain in the network parameter list.

Minimum R / G / L / C / K: Enter here the minimum value an element can take.

Create netlist as sub-circuit

Store the generated netlist as a sub-circuit format.

OK

Stores  the current settings and closes the dialog box.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

See Also

Network Parameter Extraction Overview, Network Parameter Extraction, Add Wire, Edit Wire