- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST2013: Thermal Transient Solver Accuracy
Simulation: SolverStart SimulationAccuracy
Start solution accuracy
Select the desired accuracy for the start solution of the transient problem.
This setting is equal to the accuracy of the stationary solver for the stationary solution.
Transient solver accuracy
Define the maximal tolerable error of the time integration scheme.
The time integrating scheme (T) computes a new solution (f) at :
where dt is the time-step between two solutions.
Besides the new solution an error estimation of the error o(dt) is computed as well:
If this estimated error is above the chosen accuracy limit, then the integration step is repeated with a reduced time-step.
As a consequence this accuracy setting has a great influence on the simulation time.
Note: This setting only applies if an adaptive time integration scheme was chosen.
OK
Stores the current settings and closes the dialog box.
Default
Resets all dialog parameters to their default settings.
Cancel
Closes this dialog box without performing any further action.
Help
Shows this help text.
See also:
Thermal Transient Solver Parameters, Thermal Transient Solver Overview
CST微波工作室培训课程套装,专家讲解,视频教学,帮助您快速学习掌握CST设计应用
上一篇:CST2013: Special Solver Parameters - Solver
下一篇:CST2013: Special Solver Parameters - Steady State
最全面、最专业的CST微波工作室视频培训课程,可以帮助您从零开始,全面系统学习CST的设计应用【More..】
频道总排行
- CST2013: Mesh Problem Handling
- CST2013: Field Source Overview
- CST2013: Discrete Port Overview
- CST2013: Sources and Boundary C
- CST2013: Multipin Port Overview
- CST2013: Farfield Overview
- CST2013: Waveguide Port
- CST2013: Frequency Domain Solver
- CST2013: Import ODB++ Files
- CST2013: Settings for Floquet B