- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST2013: Boundary Conditions - Boundary Temperature
录入：edatop.com 点击：
Simulation: Settings 
Boundaries Boundary Temperature
A boundary temperature may be assigned only if the corresponding boundary condition in the "Thermal Boundaries" tab is set to "isothermal".
Xmin, Ymin, Zmin, Xmax, Ymax, Zmax
Defines the boundary temperature at the specific boundary. Three different settings are possible:
Default | The background temperature will be used as a constant temperature at the boundary. |
Fixed | A specific temperature value will be assigned to the boundary. During the transient solution this value will be changing according to the reference excitation signal. |
Floating | Similar to Fixed the boundary will also have a constant temperature. However its initial value is unknown and will be calculated during the simulation, such that the total thermal heat flux is zero. |
Note: In case other isothermal boundaries or PTC solids with fixed or floating temperatures are touching a default boundary these settings will overwrite the "Default" setting.
OK
Accepts the changes and closes the dialog.
Cancel
Closes this dialog box without performing any further action.
Help
Shows this help text.
See also
Boundaries, Thermal Boundaries, Symmetry Planes, Phase Shift/Scan Angle, Unit Cell
CST微波工作室培训课程套装，专家讲解，视频教学，帮助您快速学习掌握CST设计应用
上一篇：CST2013: ADS Co-Simulation
下一篇：CST2013: Boundary Conditions - Boundaries
CST培训课程推荐详情>>
最全面、最专业的CST微波工作室视频培训课程，可以帮助您从零开始，全面系统学习CST的设计应用【More..】
频道总排行
- CST2013: Mesh Problem Handling
- CST2013: Field Source Overview
- CST2013: Discrete Port Overview
- CST2013: Sources and Boundary C
- CST2013: Multipin Port Overview
- CST2013: Farfield Overview
- CST2013: Waveguide Port
- CST2013: Frequency Domain Solver
- CST2013: Import ODB++ Files
- CST2013: Settings for Floquet B