- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST2013: ADS Design Kit Compatibility Issues
General Remarks
In CST MICROWAVE STUDIO (MWS) version 2008 the project file structure has changed. Because of this all older projects are converted to this new file structure when opened with version 2008. Once a project has been converted, it can not be read by older MWS versions any more.
The installation directory of MWS contains the definition of the ADS? Design Kit. This Design-Kit will be searched by ADS to find all available library components. Whenever a MWS-project has been enabled for ADS? Co-Simulations, an entry (a new library element) with a link to this project will be added to the Design-Kit.
When a Design-Kit from an older MWS-Version is migrated to MWS version 2008 or later, the MWS-projects referenced in the Design-Kit will be converted and can not be used by older versions any more.
-> You can not use the same Design-Kit for MWS versions 2008 or later and versions up to 2006b in parallel!
Migrating 2006b Library component to 2008
Preparing ADS Installation:
ADS 2006A user
backup gem_CSTCmptDll31.dll in [ADS_Install]bin
copy "gem_CstCmptDLL31.dll" from [MWS_2008_Install] to [ADS_Install]bin
ADS 2005A user
backup "gem_CSTCmptDll29.dll" in [ADS_Install]bin
copy "gem_CstCmptDLL29.dll" from [MWS_2008_Install] to [ADS_Install]bin
Preparing MWS Library
After backup, MOVE all files starting with "CST_ADS_DK_1" from "[MWS_2006b_Install]LibraryADSCST_ADS_DK_1circuitael" to "[MWS_2008_Install]LibraryADSCST_ADS_DK_1circuitael"
After backup, MOVE all files starting with "CST_ADS_DK_1" from "[MWS_2006b_Install]LibraryADSCST_ADS_DK_1circuitrecords" to "[MWS_2008_Install]LibraryADSCST_ADS_DK_1circuitrecords"
After backup, MOVE all files starting with "CST_ADS_DK_1" from "[MWS_2006b_Install]LibraryADSCST_ADS_DK_1circuitdesigns" to "[MWS_2008_Install]LibraryADSCST_ADS_DK_1circuitdesigns"
After backup, MOVE all files starting with "CST_ADS_DK_1" from "[MWS_2006b_Install]LibraryADSCST_ADS_DK_1circuitdata" to "[MWS_2008_Install]LibraryADSCST_ADS_DK_1circuitdata"
Preparing ADS
Start ADS
Select: "DesignKit Setup Design Kits"
Select "CST_ADS_DK_1"
press "Cut"
Design Kit of MWS 2006b is removed
Press "Browse" behind the "Path" edit field
Select the MWS library path: <MWS_2008_Install>libraryADSCST_ADS_DK_1
Press "Add Design Kit to Level"
Press OK
Close ADS (the changes take effect only at the next start)
Open ADS
open an example with an MWS library block
start simulation
MWS starts and converts the project of this library block.
A warning appears that ADS has to be restarted after the simulation in order to actualize the design kit entries.
Restart ADS
See Also
Agilent ADS Co-Simulation Overview, ADS Co-Simulation
CST微波工作室培训课程套装,专家讲解,视频教学,帮助您快速学习掌握CST设计应用
上一篇:CST2013: Boundary Conditions - Boundaries
下一篇:CST2013: Boundary Conditions - Phase Shift/Scan Angles
最全面、最专业的CST微波工作室视频培训课程,可以帮助您从零开始,全面系统学习CST的设计应用【More..】
频道总排行
- CST2013: Mesh Problem Handling
- CST2013: Field Source Overview
- CST2013: Discrete Port Overview
- CST2013: Sources and Boundary C
- CST2013: Multipin Port Overview
- CST2013: Farfield Overview
- CST2013: Waveguide Port
- CST2013: Frequency Domain Solver
- CST2013: Import ODB++ Files
- CST2013: Settings for Floquet B