• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > CST > CST2013 Help > CST2013: Coated Material

CST2013: Coated Material

录入:edatop.com     点击:

Modeling: MaterialsNew/EditNew MaterialType: PEC Coated Material

This dialog offers the possibility of defining coating materials for the actual material.

The material defined in row 1 is the nearest to the solid.

Material name

The name of the coating material. The type of this must be 'Normal'.

Thickness

The thickness of the coating material.

Rotation angle

The rotation angle column will be visible only for the thin panel material. The angle is in degrees and applies for layers composed of anisotropic or wire mesh material. An angle of zero, aligns the first principle axis of the anisotropic material (the axis for which epsr_x, mur_x, sigma_x etc. apply) with the u basis-vector of the local coordinate system attached to the body. A positive angle rotates the material axis towards the v basis-vector of the local coordinate system. The epsr_y, mur_y etc. will be used for the perpendicular direction (in the plane of the material) and epsr_z etc. won't be used at all. To rotate the whole stack of layers together, the local coordinate system (u, v, w vectors) should be rotated.

Up

Moves the actual selected coating material one row up.

Down

Moves the actual selected coating material one row down.

Insert

Creates space for a new coating material at the actual selected position in the grid.

Delete

Deletes the coating material at the actual marked position in the grid.

OK

Accepts the input and closes the dialog.

Cancel

Closes the dialog without performing any further action.

Help

Shows this help text.

CST微波工作室培训课程套装,专家讲解,视频教学,帮助您快速学习掌握CST设计应用

上一篇:CST2013: Temperature Dependent Materials
下一篇:CST2013: Material Parameters: default - Density

CST培训课程推荐详情>>

  网站地图