• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > CST > CST2013 Help > CST2013: Monitor on Edges or Curves

CST2013: Monitor on Edges or Curves

录入:edatop.com     点击:

Simulation: Monitors Monitor on Entity Monitor on Edge

This dialog box gives you the opportunity to define monitors for transient simulations. You might need these monitors to obtain additional information on the electromagnetic field distribution inside your structure. After a calculation, you can observe your monitors by selecting them in the navigation tree.

Name and type definition

Name: Displays the name for the monitor either as a user input or automatically generated.

Automatic labeling: This check button enables or disables the automatic labeling for the defined monitor. The automatically generated label consists of  the selected monitor type, including an incremented number.

Type: This drop-down list offers a selection of monitors. The currently available monitor type allows voltage or source current observations. The latter is particularly meaningful to observe the current flowing along a voltage path.

Edge or Curve Selection

Invert orientation: Each connected set of edges or curves has an orientation which results from their definition and which in general depends on the order of picking. This orientation is indicated by arrows in the monitor preview (select the monitor in the navigation tree). It will influence the solver result computed for this monitor. Activate this checkbox to invert the orientation.

Use picked edges: This option is available only when edges were picked before the dialog box is opened to define the monitor. Please note that only edges are considered which belong to a solid (no Edges from Coordinates).

Use curves: This option is available only when curves were defined before the dialog box is opened to define the monitor. When you push the button List Curves you can hide or show a list of all defined curve items from which you can select the desired items via enabling or disabling the desired check boxes.

OK

Accepts your settings and leaves the dialog box.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

CST微波工作室培训课程套装,专家讲解,视频教学,帮助您快速学习掌握CST设计应用

上一篇:CST2013: Thermal Loss Calculation Settings
下一篇:CST2013: Thermal Loss Distribution Specials

CST培训课程推荐详情>>

  网站地图