- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Windows
Supported Platforms
Windows XP Service Pack 2 (32 and 64-bit)
Windows 7 Business Class (32 and 64-bit)
Windows Server 2003 Service Pack 1 (32 and 64-bit)
Windows HPC Server 2008
32-Bit System Requirements
Minimum System Requirements
Recommended Minimum Configuration
Note | If you are using the NVIDIA Quadro2 MXR/EX video card on Windows 2000 or Windows XP, you should also download Version 40.41 or greater video driver, available for download at http://www.nvidia.com. |
64-bit System Requirements
Minimum System Requirements:
Supported processors: AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support, Intel Pentium 4 with Intel EM64T support Hard Drive Space (for HFSS software): 200 MB
RAM: 2 MB
Recommended Minimum Configuration (for Optimal Performance)
Supported processors: AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support, Intel Pentium 4 with Intel EM64T support Video card: 128-bit SVGA or PCI Express video card Hard Drive Space (for HFSS software and temporary files): 700 MB
RAM: 8 GB
Increasing RAM on a 32-Bit Windows Vista PC
Warning | Windows Vista (32-bit and 64-bit) is supported in limited capacity for this release. ANSYS will attempt to assist with any problems or questions you may have but cannot guarantee full compatibility with Windows Vista. |
If you are running the Windows Vista 32-bit Operating System, you can take advantage of potentially all the installed RAM up to a limit of 3GB on 32-bit machines. On Windows Vista, the /3gb switch has been replaced with an option called increaseuserva. You must edit its value using the bcdedit utility.
If you type bcdedit from a Windows command prompt, you will see the current values for the Boot Manager and Boot Loader. If you do not have increaseuserva set, then you will not see this line in the boot loader output.
To set increaseuserva to 3GB:
1. Open a Command Prompt window.
2. Type bcdedit /set increaseuserva 3072 in the Command Prompt window and press Enter.
To delete the increaseuserva setting, which will revert the OS back to 2GB:
1. Open a Command Prompt window.
2. Type bcdedit /deletevalue increaseuserva in the Command Prompt window and press Enter.
Note | You must edit this value as an administrator. If you have User Access Control enabled, then you must start the command prompt in elevated mode. To do this, find the Command Prompt in the Windows Start menu, right-click on it, and choose Run as Administrator. |
HFSS 学习培训课程套装,专家讲解,视频教学,帮助您全面系统地学习掌握HFSS
上一篇:Working with HFSS Projects
下一篇:Wave Ports