- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Splitting Objects
录入：edatop.com 点击：
To an object or objects that lie on the xy, yz, or xz plane, use the Modeler>Boolean>Split command.
1. Select the object you want to split. You can select more than one.
2. Click Modeler>Boolean>Split
.
The Split dialog box appears.
3. Select XY, YZ, or XZ as the Split plane.
4. Select one of the following Keep fragments options to specify which object fragments you want to keep (those on the positive side of the selected plane, those on the negative side of the plane, or all pieces on both sides of the plane):
• Positive side
• Negative side
• Both
5. Select one of the following Split objects options:
• Split entire selection
Select this option if you do not want to preserve objects that are not crossing the split plane and still part of the selection.
• Split objects crossing split plane
Select this option so that objects of the selection that do not cross the split plane are preserved after the split operation is performed.
Note | In previous versions of the modeler, the split operation only affected the selected objects that crossed the selected split plane. Other objects were ignored during the operation. In complex geometries, you may want to select everything and perform a split. In some cases, operations are still performed on selected objects that do not cross the split plane (i.e., both parts are retained, yielding the original object and an invalid object). Also, depending on the options specified, some objects not crossing the split may be deleted. The Split objects crossing split plane option allows you to identify selected objects that do not cross the split plane and ignore them for the operation. For a multiple selection, only those objects that cross the split plane are split; others are kept intact. By design, splits in existing designs from previous versions are not changed. |
6. Click OK.
The objects are divided as specified.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Specifying the Phase Angle
下一篇：Specifying the Remote Spawn Command as RSH or SSH (Linux)
