- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Selecting an Emission Test Quantity to Plot
录入：edatop.com 点击：
1. When you create the report, select Emission Test.
2. In the Report dialog box, select one of the following categories and apply an appropriate Quantity.
Variables | Intrinsic variables, such as frequency or theta, or user-defined project variables, such as the length of a quarter-wave transformer. |
Output Variables | User defined expressions applied to derive quantities from the original field solution. |
Sphere | A sphere of 1, 3, 10, or 30 meters, or of the same dimensions and RBS Simple or RBS exact (where RBS is random binary [bit] sequence). |
Cylinder | A cylinder of 3 or 10 meters, or of the same dimensions and PRBS Simple or PRBS exact. |
3. Select a Function for the quantity from the function list.
4. For Emission Test, the Report dialog also contains a button for specifying the digital signal options. The default values are a rise time of 0 seconds, and a hold time of 1 second. To specify other values, click Digital Signal....
This displays the Digital Signal Options dialog. It contains fields for the rise time and hold time.
5. OK the specified values or Cancel, Use Defaults, or Save As Default as appropriate.
