- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Get Impedance from External Design
录入：edatop.com 点击：
To get impedance from an external design:
1. Click the Setup button to display the Setup Link dialog.
For anisotropic impedance cases, select Setup X Direction Link button to chose a design which will define the impedance in the X direction. Then select Setup Y Direction Link button to chose a design which will define the impedance in the Y direction.
The Setup Link dialog has three fields under the General tab: Project File, Design, and Solution.
2. Specify the Project file for the design that is the source. A browse button [...] lets you look through your file system. If you do not specify a project file, but select the current model, the current Project File is automatically filled in.
3. Specify the Design for the source. If the source is in the current design, you can select this from a drop down menu. If you select the current model, the Project File is automatically filled in.
4. Use the radio button to specify whether to save the source path relative to The project directory of the source project or This project.
5. Specify the Solution to use. A drop down list lets you select from the available solutions.
The "Default" solution is the product dependent solution of the first Setup.
That is the setup listed first in the source design's project tree (alphanumerical order). A product specific solution of this setup becomes the default solution. In most products, it is LastAdaptive. In a Transient solution type, it is "Transient."
Note | The solution in the source design must provide data for the target design's adaptive frequency as well as its sweeps. That is, the adaptive frequency for the target design must be included in the sweep in the source design. If necessary, you can open the source design and add an appropriate frequency point to an existing sweep. |
6. Use the checkbox specify whether to Force source design to solve in the absence of linked data in the target design.
7. Use the checkbox to specify whether to preserve the source design solution. Note that in Extractor mode, the source project will be saved upon exit. Extractor mode means that the software is opened during the link solely for the purpose of solving.
8. Under the Variable Mapping tab, you can set the desired variable values in the source design. If the source and target designs contain same named variables, you can choose to Map Variable By Name. In this case, same named variables are mapped automatically.
9. Click OK to close the Setup Link dialog and return to the Anisotropic Impedance Boundary dialog.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：GetRequiredQuantities()
下一篇：GetThisJobID
