- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Sweeping Along a Path
录入：edatop.com 点击：
Sweep a 1D or 2D object along a path that is defined by an open or closed polyline using the Draw>Sweep>Along Path command.
When you are sweeping an object along a path, keep in mind that one of the path’s endpoints must lie in the same plane as the object being swept. The other endpoint must lie in a plane perpendicular to the object being swept.
To sweep an object along a path:
1. Create the polyline you want to use as a path.
2. Select the object you want to sweep, and then select the new polyline.
3. Click Draw>Sweep>Along Path.
The Sweep Along Path dialog box appears.
4. Type the angle of the twist in the path.
This is the number of degrees the profile will rotate as it is swept through the complete path.
5. Type the draft angle.
This is the angle to which the profile is expanded or contracted as it is swept.
6. Select one of the following draft types from the pull-down list box:
Extended | The new object will have sharp edges like the original object. The facetting of the faces will be displayed. |
Round | The new object will have rounded edges. |
Natural | The new object will have sharp edges like the original object |
7. Click OK.
The object is swept along the path. The polyline object used as the path is deleted. The new object has the properties of the original object. The Properties dialog box appears, enabling you to modify the object’s properties.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Submitting and Monitoring Jobs Using the Submit HPC Job Dialog
下一篇：Submitting ANSYS EM LSF Batch Jobs
